604-430-1202 24-HOUR SUPPORT
+1 604-430-1202
604-430-1202 24-HOUR SUPPORT
+1 604-430-1202
Contact Us

Motor Controls, Servos & Drive Systems


WIS provides coordinated system design, hardware supply and manufacture for high performance AC and DC drive systems for industry’s most demanding applications.
Collectively, our design team has over 100 years of experience in drive applications.
We are able to handle all challenges, including:

  • Co-ordinated speed control
  • Load sharing and tension control
  • Dynamic speed and torque response
  • Precision speed and position control
  • Torque proving for hoist applications
  • Drive sizing
  • System architecture and communications
  • Custom, Free standing or MCC line-up matching enclosures
  • Proper drive selection and sizing based on application requirements
  • Custom design, quick delivery
  • Proper packaging for challenging environments
  • Shock loading
  • Braking and overhauling loads
  • High duty cycles
  • Cost effective custom motor control panels
  • Custom Soft Starters in MCC’s or enclosures
  • Electric servo with servo motor or linear stage
  • Electric servo with AC induction motor
  • Hydraulic servo valve

All Drives are powered up and tested with a motor, prior to shipping.
WIS assumes system responsibility for all drive systems supplied.

Automation Systems

WIS provides system design, software and hardware engineering, supply and panel build ups of complete automation systems.

  • Consulting
  • Needs analysis
  • Functional Specifications

Hardware and software engineering for:

  • System Architecture and Communication
  • MES integration
  • Historian design and deployment
  • PLC systems
  • Operator interface
  • Motion control
  • Operators consoles
  • Custom reports and alarming
  • Project Management
  • AutoCAD drawings and complete system documentation
  • Complete system responsibility
  • Post installation support

Dynamic & Regenerative Braking

If you have a demanding Dynamic Braking application, call us.
We provide complete consulting, design, and custom fabrication of VFD and Servo drive Dynamic Braking resistors.

Needed for:

  • Dynamic braking (fast deceleration)
  • Overhauling loads

We recommend and use resistors from industry leader Powerohm Resistors Inc.

  • Wire wound
  • Edge wound
  • Vent wound
  • Finned grid resistor
  • Convection or fan cooled
  • NEMA Type 1 or 3R, indoor, outdoor or marine duty

Custom Railway-Welding Control Systems

As a Part of our WESPAC Automation Offerings WIS provides electronics design, and manufacture for advanced railway welding control systems:

  • Fully Autonomous Welding Systems
  • Variable Voltage/Current Control
  • AC/DC Welding for various Applications


YourPanel Shop

  • Multiple Supplier sources
  • Complete engineering service
  • AutoCAD services
  • Fabrication
  • Industrial Quality Quality Assurance 
  • Your Design reviewed
  • All panels powered up
  • Point to Point testing
  • All PLCs tested with I/O
  • All Drives tested with a motor
  • Witness or FAT
  • Attention to Detail: Industrial cable dressing & strain relief

Custom panel build-ups: 

Panel Types 

  • PLCs
  • Drives
  • Motor Controls
  • Safety Systems
  • Relay
  • Braking Resistors

Panel Styles 

  • Free standing
  • Wall Mount
  • Pedestal
  • Custom MCC
  • Custom colours

Panel Material 

  • Powder Painted Steel
  • Stainless
  • Fibreglass 4x


  • CSA C22.2 for Canada
  • UL508 for USA
  • Gost for Russia
  • Up to 600 VAC
  • Up to 1000 amps
  • Up to 500 HP

YourPanel, crafted Your Way… 

Who do you call when you have a large critical path project that requires 160 panels to be Engineered, built, documented, tested and shipped on a Just In Time basis, and you are still working on the design?

Who do you call if you have 100 panels of custom MCC, VFD and PLC products for a new plant that need to be Engineered, built, documented, tested and shipped also Just In Time? 

Who has a panel shop that is capable of handling these 2 projects at the same time, juggling priorities on a daily basis, still ensuring on time delivery, quality assurance and full functional test?

YourPanel Shop @ WIS does!

Features and Benefits 

  • Industrial Quality and Craftsmanship
  • Cost Competitive
  • Quick Delivery
  • Local Engineering and support
  • Your Design or ours
  • Your Drawings or ours
  • Intelligent Review of Your Design or let our team of engineers design it for you
  • Your Standards
  • Your Company Logo
  • Your Colour
  • Your Schedule
  • Your Test Plan or ours
Safety Relay with Dual Safety Contactors

Whether you provide your own drawings, require an Intelligent Review, or want full turnkey Design-Build, consider YourPanel Shop for the quality and delivery performance your project requires.

YourPanel shop offers 6000 sq feet of space, managed by a Panel Craftsman with well over 30 years of experience, who leads a dedicated team with over 60 years combined experience.

When 2 big projects overlapped due to customer priorities, our team orchestrated the impossible, at no extra charge. Challenge us.
Challenge YourPanel Shop @ WIS.

Engineering Systems & Design

We will design custom solutions to meet your needs:

Our engineering team offers:

  • Advice
  • Risk Assessement
  • Product customization for your facilities
  • Electrical and Control Systems Design
  • Engineered Drawings, Schematic & Wiring Diagrams
  • Turnkey Product Offerings
  • Safety Systems
  • Automation Systems
  • Hardware design and Software design/testing
  • System Simulation
  • Commissioning
  • Emergency call out service
  • Repairs

Power Smart

We are registered as a Power Smart Alliance contractor.

With our knowledge of BC Hydro’s Power Smart incentive programs,
We can:

  • audit your facility’s existing electrial loads
  • assist in the preparation of your application
  • supply and install approved devices

Eligible Technologies & Incentives change regularly
Call us or fill in the form below so we can work with you to maximize your savings.

Projects completed or underway:

  • City of Burnaby (28 facilities)
  • Corporation of the City of Delta (2 facilities)
  • printing plant in Delta


WIE takes great pride in its electrical installation services. 

  • Installation projects are completed on time,
  • on budget,
  • with minimum disruption to you, the client

Industrial or Institutional wiring installations are carefully supervised on site and performed by the best available electrician trades people in the business.

Plant Services

We can help you on a call out or scheduled basis with: 

  • Breakdowns & troubleshooting
  • Emergency 24 hour service
  • Routine maintenance
  • Overload & Shift coverage
  • Shift relief
  • Confined space entry
  • Manhole and electrical vault service
  • New equipment installation, commissioning and maintenance.


During construction, project consultation is an integral part of any undertaking.  By analyzing the requirements of each project, WIE’s experienced team can, in many cases, recommend better utilization of existing facilities, resulting in greater productivity and cost control.  Feasibility studies of new and existing applications can and do result in reduced costs and greater efficiency of the client’s electrical applications.


We can help you with: 

  • Project management
  • New plant construction
  • Plant moves
  • Institutional Fire Alarm Systems
  • Sourcing or reusing materials

Overload & Shift Coverage

We can assist when you are under-staffed or your staff is overloaded: 

  • Shift relief
  • Holiday relief
  • Plant start-up/shut-downs
  • Electrical staff shortages

All electrical maintenance work is done by fully qualified, bonded and courteous personnel.

Thermography Services

Where there is heat at loose or worn electrical joints and contacts, there is a potential for trouble.

Regular inspection of your electrical equipment using Infrared sensors can detect hot spots before they become a fire hazard. Before equipment fails, you can make repairs during regular maintenance downtime. Insurance companies require annual inspections.

We use the latest scanners and cameras for on demand or regularly scheduled inspections.

Recommended for:

  • Condition Monitoring
  • Predictive Maintenance Plans
  • Electrical & Mechanical Audits
  • Insurance Audits
  • General peace of mind

Power Quality

We can use a Fluke hand held or a permanently installed & networked power quality meter to analyze and trend your power system.

Recommended for: 

  • Avoid paying poor Power Factor surcharges
  • Excessive voltage variations
  • Voltage, Current Unbalance
  • Voltage Sags, Swells
  • Flicker
  • Harmonics
  • Oscillatory transients
  • Impulse transients
  • Frequency swings

Standards Compliance (Conversions)

Are you sourcing a machine or electrical control panel from off shore or the USA?
Be aware…

  • If it does not bear a CSA approval or ULc listed label
  • If you’re not sure it meets local electrical codes
  • Your machine can not legally be connected by a licensed Canadian electrican

Western Integrated offers the following services to importers of machines with uncertain compliance to Canadian standards and local codes

  • Incoming inspection for damage during shipment
  • Overall electrical review
  • Overall operator safety review
  • Verification of ratings and circuit protection
  • Inspection of wiring and interwiring practice
  • Inspection of wiring insulation, and spacing
  • Documentation of deficiencies found
  • Rework of deficiencies
  • Retest
  • Recertification to CSA and local code requirements